Contact Us
TEL: +86-571-85396333
E-mail: service@pcbonestop.com
Address: 12th Floor, West No.2 Building, XinTianDi Business Center, No.71-8 ShiXiang Road, XiaCheng District, Hangzhou, China
Home > News > Content
Notice Your Pcb Wiring
Nov 17, 2017

1. Power and groundlines are as close as possible, the power and ground on the entire board should be in well-shaped distribution,achieve a balanced current for the distribution line.

2. Making interference source line and the sensing line in right-angle.

3. According to the power classification, different wire should be bundled separately,the distance between the wiring harness should be 50-75mm.

4. Multilayer board: The power plane and the formation should be adjacent. High-speed signals should be near ground.

Non-critical signals are placed close to the power surface.

5. Power: When the circuit requires multiple power supplies, you should separate each power supply with ground.

11.17.3.jpg